![]() |
||||||
|
||||||
| Home | About Us | Case Studies | Certifications and Awards | References | Sales and Distributors | Service | Contact Us | ||||||
Call 802.425.3710 Fax:.802.425.2896 (info@cleanearth.biz) |
Spill Buddy1. Summary of Products: The Spill Buddy is a compact, manual, free product skimming system, designed to operate on site to skim quantities of product (LNAPL or DNAPL). The Spill Buddy's operation is based on the state-of-the-art ALPHA-ARRAY™ sensors in the probe that detect the interface between the product and the water. An audible feedback signals the user to keep the pump positioned in the product layer, and allows product skimming with virtually no water pumped (dependent on operator's reaction time in turning off the pump after hearing the audible signal for water).The compact probe with enclosed pump easily fits into wells as small as 2" in diameter. The rugged, lightweight, and convenient Spill Buddy can skim up to 0.7 gallons of product per minute. Spill Buddy also has a self contained, rechargeable battery for the sensor electronics and pump. The battery is rechargeable from a 12 VDC source (car battery or cigarette lighter socket-optional) or the wall transformer provided with the unit. Spill Buddy will operate for up to one hour of continuous pumping (approx. 40 gallons) per charge. The standard length down-well probe is 50 feet (15 meters), but a 100 foot (30 meters) probe is also an option for deeper wells. Spill Buddy Pro
The Spill Buddy Pro combines an interface meter with the Spill Buddy's free product skimming capability. The integrated measuring tape and audible feedback allow the user to determine the distance to the product surface, the depth of the product, and then to pump the accumulated product. It averages about 0.5 gallons of product per minute (approximately 35 gallons in an hour of continuous pumping). The Spill Buddy Pro's interface tape is marked in tenths and hundredths of feet; metric tapes are also available. The standard English unit includes a 50 foot down-well probe; the standard metric unit has a 15 meter probe. A 75 foot (23 meters) probe is also an option.2. Features and Benefits -
The Complete Spill Buddy or Spill Buddy Pro includes: Portable reel with 50 feet (15 meters) of down-well tubing and pump with water interface detector (Spill Buddy Pro also has a product surface sensor, and built-in interface measurement tape); 120 VAC wall transformer charger, and 10 feet of nylon NAPL discharge tubing. Minimum skimming thickness: 0.1 inch with no water pumped 0 inches with a small amount of water pumped Pumping rate: Approx. 0.7 gpm for Spill Buddy Approx. 0.5 gpm for Spill Buddy Pro Pumping head: 100 ft Pumping time: 1 hour continuous pumping per battery charge (approx. 40 gallons of Product) Battery: 12VDC, 5 Amp hours sealed lead acid (included) (We recommend a second battery for a backup on site) Battery charger: Wall transformer. A cigarette-lighter jack is available as an option for charging between sites. Fluids: Most hydrocarbons, floaters (LNAPLS) or sinkers (DNAPLS) Exception: The Spill Buddy and Spill Buddy Pro are not compatible for use with Halogenated Hydrocarbons. Viscosity Ranges Standard Pump- 0 to 10cp at 700°F Optional Medium Viscosity Pump- Up to 25cp Operating temperature: 0° to 130°F ambient temperature Size: 18 1/2"H x 15"W x 8 1/2"D Weight: 19 lbs (with battery) |
|||||
| Hazardous Env. Safety Review | Site Evaluation Guide | Magnum Spill Buster | Spill Buddy | Spill Buddy Pro | What sets it apart? | Groundwater Remediation Site Map © 2008, Clean Earth Technology, All Rights Reserved Vermont (VT) Website Design Development Clean Earth Services, Hazardous Waste Site, Magnum Spill Buster, Spill Buddy, Spill Buddy Pro, |
||||||